How To String A Guitar [The Best Way To Change Strings!]

If you’re a seasoned guitar player or if you’re just starting out, you’ll need to know how to properly maintain and take care of your instrument.

One important thing about having a guitar is being able to replace its strings on a regular basis. 

How To String A Guitar [The Best Way To Change Strings!]

Replacing the strings will help increase the longevity of your guitar and improve the quality of sound, as well as your enjoyment of playing it. 

This article will teach you how to effectively replace the strings on your guitar, how to choose the best guitar strings, how to tune your guitar during the stringing and how to clean it while you’re stringing it.

How Many Strings Does A Guitar Have?

A 6 string guitar consists of 6 strings. The modern guitar evolved from an earlier instrument called the lute. The modern guitar has six strings and uses the same tuning as the 5 string guitar. 

This is known as the EADGBE tuning (same tuning as the top 5 strings of the modern guitar). It was originally tuned in this way because it was easier for people to learn.

The first two strings are usually tuned to open notes, which means that they start on high pitch and end on low pitch. These are the lowest 2 strings. They are also often referred to as the bass or root strings. 

The next four strings are usually tuned to middle pitches, meaning that they start on medium pitch and end on high pitch. These are the 3rd, 4th, 5th, and 6th strings.

The last two strings are usually tuned so that they start on low pitch and end on high note. These are the highest 2 strings. They are often referred to as the treble or lead strings.

Why Should You Change The Strings On Your Guitar?

There are many reasons why you should change the strings on your guitar, but here are some of the most common ones:

  1. To improve the tone and sustain of your instrument.
  2. To make it easier for you to play certain chords or notes.
  3. To give your guitar a better sound.
  4. To match the strings that come with your guitar.
  5. To get rid of any buzzing sounds in your guitar.
  6. To make your guitar more comfortable to hold.
  7. To increase the volume of your guitar.
  8. To prevent damage to your guitar.
  9. To keep your guitar from sounding out of tune.
  10. To make your guitar look better.
  11. To make your guitar last longer.
  12. To make sure that your guitar is playing correctly.

What Do You Need To String A Guitar?

Guitar strings should be changed regularly. Dirt on strings is an indication of when strings need to be replaced. 

Changing strings every 2 weeks will help to make sure that your strings last as long as possible.

Here is a list of the things you will need to string your guitar:

  • Guitar
  • Pack of strings
  • String cutter
  • String winding
  • Flat surface

Choosing Your Guitar Strings

Guitar strings are made up of several materials. The most common ones are steel core wires, wrapped with nylon, wrapped with silk, wrapped with polyester, and wrapped with Kevlar.

Steel core wires give off a bright tone while nylon gives off a brighter tone than silk.

Polyester gives off a darker tone than silk. Kevlar gives off an even darker tone than polyester. There are many different types of electric guitars.

Some people prefer stainless steel while others prefer nickel. Phosphor bronze is used to make acoustic guitars.

Nylon strings are used for classical guitars. The diameter of strings is usually given as a range, such as.009-.042. Most often, the first string is.009 inch. 

Round wires give brighter sounds than flat wires do. Flat wires have a duller sound. Flat wire strings can also be found in other sizes, such as 010-039.

Round wires are generally preferred by beginners because they are easier to learn how to play.

Flat wire strings are generally recommended for intermediate players because they are easier to play and maintain than round wire strings.

Guitar Tuners

There are several different types of tuners available. They include open tuners, geared tuners, electronic tuners, and chromatic tuners.

Open tuners are the simplest type of tuner. They consist of two knobs that control the pitch of the strings.

Gear tuners are similar to open tuners except that they have gears inside them that allow them to adjust the string tension.

Electronic tuners use electronics to measure the frequency of the note being played.

Chromatic tuners are like gear tuners, but they have additional buttons that allow you to select which octave you want to tune to.

Tone rings are rubber bands that go around the neck of the guitar. Tone rings provide stability to the guitar. It helps to reduce the chance of the guitar falling over or getting damaged.

Tone rings come in various colors and styles. Some people choose to put their names on their guitars using a color code system. For example, red means “rock” and blue means “jazz”.

The best way to find out what kind of tuner you should buy is to ask someone who is used to playing music. If you don’t know anyone who plays music, then look at music magazines or online.

Stringing A Guitar: How To String A Guitar

Use our step-by-step guide below to string your guitar!

  1. Start by removing the old strings. You can either use pliers or pull them off with your fingers. If you have any extra strings hanging around, cut them off too.
  2. Now take a new set of strings and put them through the holes. Take care not to over tighten the strings. You don’t want to break them!
  3. Once you’ve got all the strings through the hole, make sure that they’re evenly spaced. Don’t let one string be closer than another. Also, don’t leave any gaps between the strings.
  4. When you’re done, tie a knot at the end of each string. Tie a knot about 1/8″ away from the end of the string. Do this for every string.
  5. After tying the knots, trim the excess string. Cut the ends of the strings down to where there’s only about 1/4″ of string left.
  6. Put the capo back on the fretboard and play some chords. Make sure that the capo is centered on the fretboard.
  7. Once you’re happy with how things sound, remove the capo.

Tuning Your Guitar

Tuning Your Guitar

Once the strings are on, you will want to tune your guitar. Tune the string to the right pitch with a guitar-tuning device. Make sure the windups go down from the top of the instrument.

String instruments need to be tuned regularly. Tuning should be done after every use. If you want your instrument to stay in tune, make sure you don’t cut the strings too short or too long.

If you notice any problems with your instrument’s tuning, call a professional luthier to fix it.

Play a few notes on each string. You may find some notes are sharper than others. This means that the string needs to be tightened more.

Here are some more tips on stringing your guitar and keeping it in good condition:

  • Wash your hands before stringing your guitar.
  • Wipe down your strings with a damp cloth.
  • Keep your fretboard clean and oiled.
  • Don’t let your strings get stuck in the nut slot.
  • Use flake graphite under the strings to remove friction.
  • Change your strings when they lose their brilliance and intonation.

A guitar string’s lifespan depends on how much you play, and how well you take care of it. 

Cleaning Your Guitar

Guitar cleaning should be done during stringing. You should use an appropriate type of string cleaner or degreaser depending on whether you’re using new or used strings.

String cleaners should be applied directly to the strings before soaking them in water. 

After the strings soak in the cleaner, they should be rinsed thoroughly to ensure that no residue remains on the strings. Once the strings dry, apply a light oil finish to protect the strings.

You should keep your guitar clean so that it stays in good condition. Cleaning your guitar will help prevent rust and corrosion. Rust and corrosion can ruin your guitar if it gets out of hand.

Cleaning Your Strings

If you’re using new strings, you’ll need to get a decent cleaning solution. There are many different kinds of string cleaners available. 

The most common ones are those made specifically for cleaning strings. These cleaners usually contain soap and alcohol. Some also contain other ingredients such as enzymes, abrasives, and detergents.

If you’re using used strings, you won’t need a cleaning solution. Just wipe the strings with a rag or towel. Be careful not to scratch the surface of the guitar.

Degreasing Your Guitar

Degreasing your guitar allows you to restore its original luster. Degreasing removes oils and waxes that accumulate on the wood.

This makes the guitar easier to maintain. It also protects the wood from damage caused by moisture.

There are two ways to do this. One way is to use a chemical-based product. Another method is to use a natural product.

Natural products include mineral spirits, turpentine, linseed oil, olive oil, and petroleum jelly.

Chemical-Based Products

There are several types of chemical-based products available. They come in aerosol cans and liquid form. 

Many of these products contain solvents like acetone, methylene chloride, and trichloroethylene. 

Other products contain chemicals like benzyl benzoate, chloroform, ethylene glycol monobutyl ether, and naphtha.

The best way to clean your guitar is to use a combination of both methods. For example, you could first use a solvent-based product to loosen dirt and grime, then use a natural product to polish the wood.

Natural Products

Natural products are safer than chemical-based products because they don’t have any dangerous chemicals.

Mineral spirits, turpentine (or white spirit), and linseed oil are all examples of natural products.

Use a damp cloth to apply the natural product to your guitar. Rub the cloth gently over the entire surface of the guitar. 

Let the cloth sit on the guitar for about five minutes. Then rinse off the cloth with warm water. Repeat this process until the wood has been cleaned.

Using A Chemical-Based Product

Use caution when applying chemical-based products. Make sure that you follow the manufacturer’s instructions carefully. 

Also, make sure that you wear gloves while working with the product. If you don’t, you may end up getting some of the chemicals on your skin.

Once you’ve finished cleaning your guitar, dry it thoroughly. Use a soft brush or an old toothbrush to remove excess dust. Don’t forget to dry the inside of the guitar case too.

Final Thoughts

Replacing the strings on a guitar is important for maintaining your guitar. You can do this yourself if you know how to do it properly. 

However, if you want to avoid damaging your guitar, you should hire someone who knows what he or she is doing like a luthier.

If you take good care of your instrument, you can keep it looking and sounding great for years to come.

Howard Matthews